Lipo Chemical\'s exfoliating cream cleanser
A rich, cleansing and exfoliating cream with Lipo VI 60/100 for subtle exfoliation which leaves the skin soft and smooth.
Description:
A rich, cleansing and exfoliating cream with Lipo VI 60/100 for subtle exfoliation leaves the skin soft and smooth. This cleanser provides soft foam and leaves skin feeling refreshed but not dry with the addition of Jojoba Buttercreme.
Formulation:
| SEQUENCE | PERCENT | INGREDIENT | INCI NAME |
|---|---|---|---|
| 1 | 65.10 | Deionised Water | Water |
| 1 | 2.00 | Liponic EG-1 (1) | Glycereth-26 |
| 1 | qs | Preservative | (Preservative) |
| 1 | 0.40 | Carbopol 980 (9) | Carbomer |
| 2 | 10.00 | Hostapon SCI-85 (148) | Sodium Cocoyl Isethionate |
| 2 | 5.00 | Cocamidopropyl Betaine | Cocamidopropyl Betaine |
| 3 | 6.00 | Lipocol C (1) | Cetyl Alcohol |
| 3 | 1.50 | Lipo Stearic Acid (1) | Stearic Acid |
| 3 | 4.00 | Jojoba Buttercreme (144) | Butyrospermum Parkii (Shea Butter) (and) Jojoba Alcohol (and) Potassium Jojobate (and) Simmondsia Chinensis (Jojoba) Butter (and) Propanediol |
| 3 | 3.00 | Lipovol MOS-130 (1) | Tridecyl Stearate (and)Tridecyl Timellitate (and) Dipentaerythrityl Hexacaprlylate/Hexacaprate |
| 4 | 2.00 | Lipo VI 60/100 (1) | Phytelephas aequatoralis Seed Powder |
| 4 | 1.00 | Lipo JJM 24/60 (1) | Simmondsia Chinensis(Jojoba) Seed Powder |
(1) Lipo Chemicals, Inc.
(119) Ruger Chemical Co.,Inc.
(9) Noveon
(144) Lipo Chemicals - Desert Whale Jojoba
(148) Clariant
Procedure:
1. In main kettle, pre-mix the Carbomer 980 into the Liponic EG-1 then add to Sequence 1 and mix for 5 min. at room temperature.
2. Heat Sequence 1 to 70-75°C, slowly add Sequence 2, one ingredient at a time, until well incorporated.
3. In a separate vessel, combine Sequence 3, heat to 70°C, add to above, mix until uniform, smooth emulsion is formed, scraping sides often.
4. Start cooling batch with slow mixing.
5. Continue cooling to 35°C. Adjust pH if necessary.
6. Add Sequence 4, mix until uniform.
Specifications:
pH: 5.5 - 6.5
Viscosity: RVT/TF @ .3 rpm = 900,000 cps ± 1%
Stability: 1 month 50°C
