Meanwhile, the air-assisted model uses an external air source to control the atomisation and allow for lower operating pressures (5 psi). The pressure of the liquid and air can be independently controlled to fine tune the flow rate and nozzle performance to suit the application requirements.
Precise spray patterns ensured with Lee
Meanwhile, the air-assisted model uses an external air source to control the atomisation and allow for lower operating pressures (5 psi). The pressure of the liquid and air can be independently controlled to fine tune the flow rate and nozzle performance to suit the application requirements.
You may also like
Trending Articles
You may also like
You need to be a subscriber to read this article.
Click here to find out more.
Click here to find out more.
Manufacturing
Managing microbial risk in cosmetics production
The management of microbial risk in non-sterile manufacturing environments can be complex and companies may find out that a risk was badly managed only when things go wrong. Experts at Pharmig’s February conference, in Nottingham, UK, looked at best practice in managing the risks
