Lightly tinted BB Cream with Jojoba Buttercreme and Biopolymer
This lightly tinted cream provides even skin tone and UV protection.
TINTED BB CREAM With Jojoba Buttercreme™ and Biopolymer BHA-10 NO. 1744
DESCRIPTION:
This lightly tinted cream provides even skin tone and UV protection. Jojoba Buttercreme™ nourishes the skin and provides the combined benefits of Shea and Jojoba butters. BioPolymer BHA-10 provides substantive moisturization.
FORMULATION:
SEQUENCE | PERCENT | INGREDIENT | INCI NAME |
---|---|---|---|
1 | 66.27 | Deionized Water | Water |
1 | 0.10 | Tetrasodium EDTA | Tetrasodium EDTA |
1 | 3.00 | Liponic® EG-1(1) | Glycereth-26 |
1 | 0.40 | UltraThix® P-100 (8) | Acrylic Acid/VP Crosspolymer |
1 | qs | Preservative | (Preservative) |
2 | 3.00 | Liponyl® 601 BN SPEC (1) | Mica (and) Boron Nitride |
2 | 5.75 | BTD 401 (55) | TiO2 (and) Isopropyl Titanium Triisostearate |
2 | 0.75 | BYO-I2 (55) | Iron Oxides (C.I. 77492) (and) Isopropyl Titanium Triisostearate |
2 | 0.15 | BRO-I2 (55) | Iron Oxides (C.I. 77491) (And) Isopropyl Titanium Triisostearate |
2 | 0.08 | BBO-I2 (55) | Iron Oxides (C.I. 77499) (And) Isopropyl Titanium Triisostearate |
3 | 5.00 | Lipomulse® Luxe (1) | Cetearyl Alcohol (and) Glyceryl Stearate (and) PEG-40 Stearate (and) Ceteareth-20 |
3 | 4.00 | Jojoba Buttercreme™ (144) | Butyrospermum Parkii (Shea Butter) (and) Jojoba Alcohol (and) Potassium Jojobate (and) Simmondsia Chinensis (Jojoba) Butter (and) Propanediol |
3 | 7.50 | Parsol® MCX (133) | Octymethoxy cinnimate or Octinoxate |
3 | 1.50 | Liponate® ISA(1) | Isostearic Acid |
3 | 0.50 | Vitamin E Acetate | Tocopheryl Acetate |
4 | 2.00 | Biopolymer BHA-10 (1) | Polyquaternium-10 (and) Hyaluronic Acid |
(1) Lipo Chemicals, Inc.
(8) Ashland
(55) Kobo
(133) DSM
(144) Lipo Chemicals – Desert Whale Jojoba
PROCEDURE:
1. In the main kettle, disperse Ultrathix® P-100 into Sequence 1 with rapid mixing, mix for 15 minutes or until free of lumps, then heat to 70˚C to 75˚C.
2. Grind/Blend Sequence 2 until uniform, then add to Sequence 1 while rapid mixing.
3. In a separate vessel, heat Sequence 3 to 75-80˚C and mix well. Slowly add Sequence 3 to
Sequence 1 with medium mixing until a smooth emulsion is formed.
4. Start to cool. Continue mixing on medium speed, scraping sides often.
5. Add Sequence 4, when temperature is at or below 35°C, continue mixing and cooling to 25°C.
SPECIFICATIONS:
pH: 6.0 ± 0.3
Viscosity: 430,000 cps ± 10% (RVT/TE/0.6RPM)
Stability: 1 Month at 50°C