Formulation 1
Natural Protein Cream Shower Honey is a soft cleansing concept from Dr. Straetmans that provides a soft and smooth skin after feel.
![Naturals formulations: Exploring how ingredients get back to nature](/article-image-alias/naturals-formulations-exploring-how-ingredients-get-3.png)
Preparation
Mix ingredients of phase A and heat up to 78°C. Mix components
of phase B and heat up to 78°C. Emulsify phase B into phase A
under stirring. Homogenise for two minutes using an Ultra Turrax.
Cool down under slow stirring and add phase C. Adjust pH value
to 5.3.
Formulation 2
A natural face toner to help reduce shine, refine pores and control oily skin, the Pore-fect Complexion Natural Face Toner formulation contains Croda’s Ecocert-certified organic solubiliser Natragem S140 and is made via cold process.
![Naturals formulations: Exploring how ingredients get back to nature](/article-image-alias/naturals-formulations-exploring-how-ingredients-get-4.png)
Preparation
At room temperature, combine all ingredients with mixing. Check
pH and adjust to 5.5 ± 0.5.
Formulation 3
In the hair care category, CLR proposes this rinse-off 5 in 1 Natural Hair Conditioner, which contains its Vitamin F forte and DayMoist CLR ingredients.
![Naturals formulations: Exploring how ingredients get back to nature](/article-image-alias/naturals-formulations-exploring-how-ingredients-get-5.png)
Preparation
Pre-disperse phase A and heat up phases A and B separately to
80°C. Add phase A to B and homogenise using an Ultra Turrax.
Cool down to 40°C and add phase C. Homogenise again. Cool
down to room temperature with medium stirring and adjust pH
value with phase D.
Formulation 4
A 100% Natural Foundation from Seppic with a light, satiny formula to even out the complexion, as well as anti-ageing efficacy thanks to the inclusion of Survicode.
![Naturals formulations: Exploring how ingredients get back to nature](/article-image-alias/naturals-formulations-exploring-how-ingredients-get-6.png)
Preparation
Disperse Solagum AX in hot water phase with Silverson mixer.
Emulsify the oil phase in the water phase with Silverson at 80°C
then disperse pigments with Silverson. Add Aminat CB at about
40°C while mixing with Rayneri mixer.